Requirements
- Smartgloves
- USB-C cable
Things to try
When upgrading the firmware fails, please try the following:
- Disconnect your Smartgloves' HUB from the USB-C cable and also disconnect the battery, so that the Smartgloves are completely turned off.
- Now connect the battery again and a few seconds later connect the USB-C cable (Anker) between the HUB and your computer again (try a different port, and avoid USB 3.1 ports).
- Go through the firmware upgrade again.
Rokoko Studio Firmware update panel
If you are trying to update the firmware when it actually already is running the latest one (as you can see above), you might get a firmware update failure message. Please disregard the update and simply connect your Smartgloves to your wifi network, your Smartgloves should connect.
Unknown Error: Status code 0010
This applies to customers who see this error when trying to upgrade the firmware:
The error code 0010 has been known to indicate a communication issue, most commonly caused by firewalls. Please follow the guidance in this article to disable your firewall or add exception rules to allow communication between the Smartsuit Pro and machine.